⚠️ IMPORTANT PRESSING AND INSTALLATION WARNING:
- Hammering Disaster: When installing a new BMW E34 Rear Wheel Bearing, the bearing must not be hammered onto the hub with a hammer or mallet! The steel balls inside the bearing can be damaged within the first kilometer due to impact. The installation must be done with a hydraulic press and appropriate blocks to ensure precision.
- Hub Shaft Inspection: When an old, worn out, and overheated BMW E34 Rear Wheel Bearing is removed, it is essential for your technician to inspect the wheel carrier (hub). If the old bearing has worn or scratched the hub, the new bearing will also develop play in a short time.
The BMW E34 Rear Wheel Bearing from the A-Quality BSG brand, which ensures the smoothness of the rear wheels of the BMW 5 Series E34, known for its legendary rear-wheel drive power on the asphalt, is now available! This precision steel part transmits the enormous rotational force from the shaft to the wheel without friction through the hub, but the grease inside can dry out and the balls can wear due to years of fatigue, heavy loads, and rough roads. A faulty BMW E34 Rear Wheel Bearing can cause an unbearable "hum" inside the cabin, reminiscent of an airplane taking off or a helicopter rotor sound, especially after reaching speeds of 60-80 km/h, turning the comfort of that premium executive vehicle into sheer torture. Moreover, overheating can even lead to wheel lock-up. To eliminate these dangerous play and headache-inducing hums from your vehicle's rear suspension, you can reset your rear wheel mechanics with this brand new BMW E34 Rear Wheel Bearing, manufactured to international standards. Arriving in a sealed box and lubricated with special long-lasting grease, this imported BMW E34 Rear Wheel Bearing ensures that your wheels glide on the road like oil, positively impacting your fuel consumption.
- Zero Cabin Hum: A brand new BMW E34 Rear Wheel Bearing completely eliminates that ear-piercing rotor sound coming from the rear seat or wheels at high speeds.
- Low Rolling Resistance: Thanks to its flawless steel balls, it minimizes friction, allowing the vehicle to glide on the road and easing traction.
- BSG Assurance: It is the most preferred, high price/performance ratio, and long-lasting imported brand in the automotive spare parts market.
- Safe Driving: Prevents the wheel from slipping, swaying, and creating danger at high speeds or sharp turns.
Technical Details
| Brand |
BSG (A-Quality Imported Suspension Part) |
| Product Code |
15-605-006 |
| Product Type |
BMW E34 Rear Wheel Bearing (Single Rear Hub Bearing) |
| Compatibility |
BMW 5 Series E34 Sedan / Touring (For All Engine Options) |
Frequently Asked Questions (FAQ)
I hear a terrible hum when my car reaches 80 km/h from the back, but I can't quite figure out which side it's coming from. If I only change this BMW E34 Rear Wheel Bearing for the right side, will the noise stop? To determine which side the hum is coming from, you can safely sway the vehicle slightly to the right and left (taking turns) on a safe road and listen to the sound; the noise from the loaded wheel will increase. However, since bearings generally have the same mileage lifespan, when the right side fails, the left side is likely to fail soon as well. To save on labor and achieve perfect silence, it is recommended to replace them as a pair.
Does it come with installation grease or extra segments? The technician said to get grease as well. Modern wheel bearings are produced as a "sealed system" and are factory-filled with lifetime, high-temperature resistant special bearing grease. There is absolutely no need for your technician to open the bearing and lubricate it with extra grease. You can also procure the aging outer dust seal (if your technician deems it appropriate to renew) along with this BMW E34 Rear Wheel Bearing order.
