This FEBI BILSTEIN (280170) front left (driver side) tie rod is used in the front suspension of the BMW 3 Series E90 Sedan (2005-2012) and E91, E92, E93 chassis. Known in the market as "Z Rod," this part connects the sway bar (stabilizer) to the front shock absorber. It completely eliminates annoying "clunk" noises from the front suspension on rough roads, preventing the vehicle from leaning in corners and restoring your BMW's legendary handling dynamics.
- Increases Cornering Stability: Transfers the flex of the body to the sway bar, preventing roll and ensuring a safe drive.
- Quiet Front Suspension: Isolates 100% of the rattling and metallic knocking noises caused by worn tie rod joints.
- OEM Manufacturer Quality: Made from corrosion-resistant steel and long-lasting rubber dust boots, meeting original factory standards.
- Left Side: Specifically manufactured with a unique angle for the front left (driver side).
Technical Details
| Brand |
FEBI BILSTEIN (Germany) |
| Product Code |
280170 |
| Possible OEM References |
31 35 6 765 933 (Left Reference) |
| Installation Location |
Front Axle / Left Side (Driver Side) |
| Length |
Approximately 295 mm - 300 mm |
Frequently Asked Questions (FAQ)
Can I install this on the right side? **ABSOLUTELY NOT.** The curves and joint angles of the front tie rods (Z rods) in BMW E90 chassis are asymmetric. The slope of the right side is different. Forcing this product onto the right side will cause the rod to rub against the shock absorber and break when you turn the steering wheel.
Is it okay to just replace the left side? It is possible, but for the suspension components (especially those connected to the sway bar) to have equal flex and wear, it is best and most durable to replace them **as a set (Left and Right)**. If one is worn out, the other is likely nearing the end of its life as well.
Does it come with a nut? Yes, most FEBI boxes come with new "fiber (self-locking)" mounting nuts attached to the product. You won't have to deal with worn-out and stripped nuts.