BMW 3 Series E36 Engine Parts and Gaskets

3 Series E36 (1991–1998) Engine Parts and Gasket Subcontent

Engine Parts and Gasket Packaging and Delivery
Our Engine Parts and Gasket sets designed for the 3 Series E36 (1991–1998) are carefully packaged in specially designed boxes reinforced with impact-resistant foam material. Each component included in the Engine Parts and Gasket Set, such as cylinder head gasket, valve guide seals, intake and exhaust manifold gaskets, oil seals, piston set, crankshaft kit, main bearing sets, timing chain set, valve springs, rod ends, spark plug wires, oil pump gear, water pump, thermostat, and gasket set, is allocated a separate section. This ensures maximum protection against vibrations and impacts during transport, keeping the parts safe from deformation due to handling or storage.

We offer a delivery guarantee of 24–48 hours across Turkey. You can track your shipments in real-time with live cargo tracking and monitor every stage of the delivery process. Additionally, with our cash on delivery option, you can easily make the payment to the delivery personnel when your Engine Parts and Gasket set is delivered to you, whether you ordered online or by phone. The cash on delivery option is an essential part of a reliable shopping experience and ensures our customers feel at ease throughout the process.

Engine Parts and Gasket Warranty Conditions
All our Engine Parts and Gasket components are covered by a 2-year warranty for original BMW OEM parts and a 1-year warranty for approved aftermarket alternatives. Our warranty conditions include the following items:

• Manufacturing Defects and Material Flaws: Right to free replacement and repair when a factory defect is observed in the gasket or engine part.

• Incompatibility Cases: In the event of incorrect part shipment according to your chassis number (VIN), free replacement and shipping options are available.

Engine Parts and Gasket After-Sales Technical Support
Engine Parts and Gasket sets come with a 24/7 technical support line for every BMW E36 owner who chooses our products. Our expert team:

• Chassis Number (VIN) Verification: Determines which part code is fully compatible with your vehicle.

• Installation Guidance: Provides step-by-step guidance via phone, video conference, or screen sharing for critical steps such as cylinder head installation, valve guide seal placement, manifold gasket alignment, oil seal and O-ring installation.

• Torque and Sequencing Information: Informs you how to apply the recommended torque values for main bearing sets, bolts, cover bolts, and timing chain tension points using dial torque wrenches.

• Engine Testing and Witness Procedures: Defines quality approval steps such as cooling circuit leak testing, oil pressure gauge checks, valve clearance measurements, and timing chain tension checks after installation.

With this support, your Engine Parts and Gasket set will be smoothly commissioned, providing reliable performance in the long term.

Engine Parts and Gasket Set Content and Product Variety

Engine Parts and Gasket set offers a wide range of content covering all critical parts of the E36 engine. Below are the main product groups you will find in your set:

1. Gasket Families

   • Cylinder Head Gasket (multi-layer steel & rubber)

   • Valve Guide Seal Set (EPDM/PTFE)

   • Intake Manifold Gasket (metal-reinforced silicone)

   • Exhaust Manifold Gasket (high-temperature resistant metal & rubber)

   • Oil Seals and O-Rings (nitrile rubber)

   • Valve Cover Gasket Set (aluminum-reinforced rubber)

2. Mechanical Engine Parts

   • Piston Set: Alloy aluminum pistons, along with piston rings

   • Crankshaft Kit: Forged steel crankshaft, balance weights, balance cover gasket

   • Main Bearing Sets: Upper and lower cover bearing set; alloy steel, OEM tolerances

   • Timing Chain Set: Chain, tensioner, guide rails, and assembly clamp tools

   • Valve Springs and Guide Sets: Valve spring, valve stem seal set, valve plastic guide rail

   • Oil Pump Gear and Housing Gasket Set: High-pressure oil pump gears and gasket

   • Water Pump & Thermostat: Cooling circuit water pump housing, thermostat, and gasket

   • Spark Plug Wires and Coil Connections (optional additional set): High-insulation ignition wires

   • Engine Block Mounting Bolts and Nuts: Special alloy bolt set, washers, and lock nuts

3. Extra Accessories

   • Air Intake Hose Gasket Set

   • Fuel Injector Gasket Set

   • Valve Cover Gasket Set

   • Water Pump Seals

   • Turbo Hose Clamps (for turbo engine)

This rich Engine Parts and Gasket variety offers a single-source solution for the complete overhaul or major maintenance processes of your E36 engine. If you need Engine Parts and Gasket components, you can find them in our set and complete your order in one go.

Engine Parts and Gasket Installation and Setup Detailed Guide

1. Safety and Preparation

   • Wait at least 2 hours until the engine is completely cool.

   • Engage the vehicle parking brake, disconnect the negative terminal of the battery.

   • Open the engine hood and illuminate the work area.

2. Removal of Old Engine Parts and Gasket Components

   • Remove the air intake hose, valve cover, and manifolds to take out the old gaskets.

   • Remove the timing chain cover, water pump, and thermostat.

   • After removing the oil pump and oil seals, remove the oil pan to access the main bearing sets.

   • Loosen the cylinder head nuts using the cross-tightening method and lift the cover; use a valve spring compressor to secure the valves.

   • Carefully remove the old pistons, crankshaft, and bearings from the engine.

3. Surface Preparation

   • Clean the gasket surfaces with solvent and a plastic spatula; leave the metal surface dry and smooth.

   • Leave the cylinder walls clean, free of dust and debris; also clean the piston ring grooves.

   • Clean and dry the crankshaft and bearing housing surfaces with a cleaner.

4. Placement of New Engine Parts and Gasket Components

   • Piston and Rings: Place the piston rings in the correct order and direction into the piston grooves. Push the pistons into the cylinder bores using a piston-specific clamp tool.

   • Crankshaft and Bearings: Lubricate the main bearing sets and place them into the bearing housings, position the crankshaft into its housing, and secure the upper bearing caps using the cross-tightening method and manufacturer torque values.

   • Timing Chain: Align the chain with the gears, install the tensioner and guide rails; place the tensioner spring and tighten its bolt to the recommended torque.

   • Valve Seals and Springs: Place the valve seal guides onto the valve stems, install the valve springs using a special installation tool.

   • <