Mercedes C-Class W205 Wiper and Glass Systems

Wiper and Glass Systems Packaging and Delivery
Our Wiper and Glass Systems set designed for the C-Class W205 (2015–2020) is packaged in impact-resistant foam interlayered, compartmentalized special boxes. All components of the Wiper and Glass Systems—front/rear wiper arms and rubber blades, glass seals, glass lift mechanisms, window switch modules, water spray hoses, and connection fittings—are secured in separate compartments. This packaging arrangement ensures that your parts are protected against vibrations, impacts, and moisture during shipping. Your shopping experience is both secure and practical with delivery across Turkey within 24–48 hours, live cargo tracking, and cash on delivery options.

Wiper and Glass Systems Warranty Conditions
A 2-year warranty is offered for original OEM parts and a 1-year warranty for ISO/TS 16949 certified aftermarket alternatives. Conditions covered under warranty include:

• Manufacturing Defects and Material Flaws (tears in the wiper rubber, glass seal deformation, lift mechanism failure, button contact issues)

• Shipping Damages (packaging deformations, scratches or dents on parts)

• Incorrect Part Shipment (incorrect Wiper and Glass Systems component based on your chassis number)

Returns for products purchased with cash on delivery can also be quickly processed with cash or bank transfer at the door.

After-Sales Technical Support
Our technical support line, available 24/7, is here to assist you during the installation and commissioning process of the Wiper and Glass Systems. Our expert team:

• Confirms the correct Wiper and Glass Systems codes by checking your vehicle's chassis number (VIN),

• Glass seal replacement, glass lift installation, window switch setup, and step-by-step guidance via phone or screen sharing during wiper arms/blade installation,

• Explains in detail how to perform post-installation water leakage tests, button function checks, and wiper speed adjustments,

• Provides solutions for reading glass motor fault codes with an OBD scanner.

Wiper and Glass Systems Set Content and Technical Specifications

1. Wiper Components

   • Front/Rear Wiper Arms: Corrosion-resistant metal alloy arms; pivot nuts that provide a “click” feeling.

   • Wiper Rubber Seals: UV and heat-resistant EPDM rubber; quiet, scratch-free cleaning performance.

   • Wiper Motor & Gear Set: 12 V, low noise and vibration-free operation with optimized gear ratio.

   • Pivot Caps and Nuts: Waterproof cap design; nut set at OEM torque values.

2. Glass System Parts

   • Glass Seals: Door and front glass upper/lower seals; high-density EPDM material, water and dust sealing.

   • Glass Lift Mechanism: Closed gear design, metal alloy gears that do not require lubrication.

   • Window Switch Modules: LED illuminated, ergonomic OEM compatible button; reliable electrical contact.

   • Glass Motors: 12 V high torque motors providing quiet and fast glass movement.

   • Electrical Wiring Harnesses & Connectors: Waterproof connectors; OEM color-coded wires.

3. Mounting Brackets and Accessories

   • Seal and Panel Clips: OEM compatible plastic/metal clip sets.

   • Screw, Nut, and Washer Set: High-strength screws, spring nut, and washer group.

   • Lubrication & Cleaning Sprays: Silicone-based spray for cleaning gears, seals, and rails.

Wiper and Glass Systems Installation and Setup Guide

1. Preparation:

   • Turn off the ignition, disconnect the negative terminal of the battery.

   • Prepare basic tools such as a panel spatula, torque wrench, and screwdriver set.

2. Removal of Old Parts:

   • Wiper Arms/Blades: Lift the arms, remove the pivot cover and loosen the nuts; detach the arms and separate the wiper seals.

   • Glass Seals: Gently remove the upper and lower seals by taking off the door panels.

   • Glass Lift & Motor: Remove the inner door panel and disconnect the electrical connectors to take out the mechanisms.

   • Window Switch: Remove the clips from the console panel and detach the switch, disconnect the connectors.

3. Surface Cleaning:

   • Clean the panel and seal grooves from dust and old adhesive residues.

   • Clean the contact surfaces of the button panel with electrical spray.

4. Installation of New Parts:

   • Glass Seals: Push the EPDM seals into their grooves until you hear a “click,” then clip them in.

   • Glass Lift & Motor: Install the mechanism in place and tighten the nuts and bolts to OEM torque values; connect the sockets.

   • Window Switch: Snap the panel clips into place and connect the sockets; perform a function test.

   • Wiper Arms: Tighten the pivot nuts with a torque wrench and integrate the rubber wiper seal into the arm.

5. Test & Control:

   • Reconnect the battery; fully open and close the window with the window switch and verify that it operates smoothly.

   • Wiper functions should be tested at all speed settings and in spray mode.

   • Confirm all functions before reattaching the panels and clips, then secure the panels to complete the installation.

Wiper and Glass Systems Maintenance and Longevity Tips

• Seal Inspection: Inspect glass seals and wiper rubber for cracks or wear every 20,000 km.

• Gear Lubrication: Lubricate the glass lift mechanism with a silicone-based spray every 40,000 km to prevent squeaks and sticking.

• Button Cleaning: Periodically clean the contacts of the window switch with electrical spray.

• Wiper Replacement: Replace rubber seals every 6 months or immediately if they leave streaks.

• Winter Preparation: Protect seals with a silicone-based protective spray against freezing.

In this sub-content, the keyword Wiper and Glass Systems is frequently emphasized in the sections on delivery, warranty, technical support, set content, installation guide, and maintenance to target SEO optimization. C-Class W205 owners can confidently select, install,