[ IMPORTANT WIRE CONNECTION AND LUBRICATION WARNING ]
Wire Connection Disaster: Instead of replacing an old BMW E36 Hood Lock Lower Left mechanism with broken springs or stripped teeth, temporarily tying the hood with zip ties, wire, or string and hitting the road is pure suicide. The lifting force of the wind entering under the hood at highway speeds is enormous; the wire breaks, the hood flies up, shattering the windshield and crushing the roof. Faulty locks should never be repaired under any circumstances; they must be replaced immediately with a new one.
Saving the Day with Rust Remover: Thinking that spraying plenty of WD-40 or grease on a lock that won't close or is hard to open solves the problem is a big misconception. The lock metal has fatigued and worn out over the years. Lubrication may only cause the worn mechanism to suddenly open more easily while driving.
The modified, drift, and sporty driving legend of BMW, the 3 Series E36, is now equipped with the highest quality ASPART brand imported BMW E36 Hood Lock Lower Left! This vital steel mechanism secures your vehicle's heavy metal hood to the chassis, ensuring that the hood does not budge even a millimeter against wind resistance. Over time, this mechanism can deform due to vibrations, oxidation, and the harsh closing of the hood. An old BMW E36 Hood Lock Lower Left part that remains partially open, does not release when you pull the hood latch, or causes the hood to tremble from the left side while driving, disrupts your vehicle's aerodynamics and leaves you at risk of the hood opening at any moment. To eliminate these frightening mechanical risks from your classic E36 and regain that reassuring "click" closing sound, you can reset your locking system with this brand new BMW E36 Hood Lock Lower Left, produced from forged steel to OEM standards. This imported product comes with its original mounting holes and a high-tension spring mechanism, keeping your E36's hood locked and secure even at highway speeds.
High Strength Steel Body
Manufactured from heavy-duty steel with ASPART engineering. It never bends or breaks against the tons of lifting force created by the hood's wind resistance.
Reinforced Spring Mechanism
A brand new BMW E36 Hood Lock Lower Left allows the left side of the hood to be instantly lifted without sticking as soon as you pull the lever from inside, thanks to its high-tension push springs.
Original (OEM) Millimeter Fit
It is perfectly compatible with the mounting slots on the front panel and the hood upper pin. It does not cause alignment issues such as left-right misalignment or staying up when installed.
Technical Details
| Brand |
ASPART (A-Quality Imported Body and Lock Components) |
| Product / Reference Code |
7EHL1002 |
| Product Type |
BMW E36 Hood Lock Lower Left (Hood Lower Lock Corresponding) |
| Compatibility and Direction |
Compatible with all models of BMW 3 Series E36 chassis. The direction is the LEFT side of the vehicle (when viewed from the driver's seat). |
Frequently Asked Questions (FAQ)
When I pull the lever from inside, the hood opens very hard or someone has to press down on the hood from the outside. Will just replacing the left lock fix it?
The difficulty in opening the hood is caused by two reasons: Either your lock mechanisms (right and left) have rusted and jammed, or the hood release cable connecting the locks to each other and inside has rusted and stretched. If the left lock is obviously broken, this product will solve the problem, but for the system to work perfectly, it is generally recommended to replace the right lock, left lock, and release cable as a set, followed by a proper adjustment of the hood lock by a skilled body shop.
When I close the hood, the left (driver) side stays up (gap) and doesn't sit properly. Is this part the reason?
Yes, the reason the left side stays up is usually due to the spring of this lower lock mechanism failing to pull the hood upper pin down completely. When the new lock is installed, the mechanism will catch the hood properly, and your bodywork's left-right alignment will achieve a smooth line.
