BMW 5 Series F10 2009-2016 Door Trim Kit Sedan Velvet
BMW 5 Series F10 Compatible Velvet Door Seal Set (Sedan)
This complete door seal set is specially manufactured for the F10 chassis (Sedan) models of the BMW 5 Series produced between 2010 and 2017. To maintain the comfort of premium segment vehicles, the surfaces facing the interior are covered with velvet (flock) in accordance with original equipment standards. It eliminates problems such as wind noise (howling), water leakage, and road noise caused by seals that harden or tear over time. It gives a solid sound to your vehicle's door closing.
Technical Specifications and Product Details
| Compatible Model | BMW 5 Series (F10) |
| Compatible Years | 2010 - 2017 |
| Body Type | Sedan (4 Door) |
| Package Contents | 4 Pieces (Front Right, Front Left, Rear Right, Rear Left) |
| Surface Feature | Interior Velvet (Flocked) |
| Installation Location | Clips onto the Body |
Important Compatibility Note
This product set is fully compatible only with F10 Sedan chassis.
F11 (Touring/Station Wagon) and F07 (Gran Turismo - GT) models have different rear door shapes and roof structures. If your vehicle is not a Sedan, please contact us before placing your order.
Frequently Asked Questions (FAQ)
Is the product "Velvet" model?
Yes, this is the detail that F10 users pay the most attention to. The parts of the seals facing the interior and the roof lining are covered with soft velvet (flock), just like the original BMW seals. This provides a premium appearance and prevents plastic squeaks.
Does it solve the chronic wind noise in F10s?
The wind noise observed at speeds above 120 km/h in BMW F10 chassis is usually caused by the compression of the seals. This new seal set, which maintains its shape, significantly reduces wind noise by restoring the insulation between the door and the body to factory values.
Is it compatible with vacuum (Soft Close) doors?
Yes, it is compatible. However, since the new seals are thicker, the closing resistance of the doors may increase slightly during the first 1-2 weeks. As the seals settle, the vacuum system and door closing will return to normal softness.
How is the installation done?
The product does not require adhesive; it is of the clip-on type. Simply pull out the old seal and place the new seal into the channel by aligning the corners. There are metal reinforcements inside the seal to ensure retention.
This product is equivalent to the following OEM/original part numbers. You can search by your vehicle's original part number.